Isolated Digital I/O Board for PCI
PIO-32/32L(PCI)H
This product is the interface board of the PCI bus conformity which outputs and inputs a digital signal. The digital signal of 12 to 24VDC can be outputted and inputted. The input of a maximum of 32 points and the output of a maximum of 32 points can be performed on this one board. The driver (API-PAC(W32)) for Windows and Linux appending.
Certification
CE
Environmental
RoHS Directive
Features
- The input of a maximum of 32 points and the output of a maximum of 32 points can be performed on this one board. Because of the common composition of a 16-point unit, each common line can respond to a different external power supply.
- Since the PCI bus (personal computer) and the input/output interface are isolated by the photo-coupler, it excels in noise-protection nature.
- It can interrupt and 32 points of an input signal can be used as an input. Moreover, the edge of the input signal can also generates interruption.
- It has the digital filter function for preventing the incorrect input by the noise or the chatering.
- The rating of an output signal is a maximum of 35 VDC and 100mA per point. Zener diode is connected to an output transistor for protection from surge voltage. Moreover, the over-current protection element is attached per eight output transistors.
- PIO-32/32L(PCI)H, and PIO-32/32L(PCI) are connector pin compatibles.
Specification
Digital I/O
Bus
PCI
Function
I/O
Input
32
Output
32
Bidirection
Response speed
200μsec(max.)
Operation voltage
Input: 12--24VDC
Operation voltage
Output: 12--24VDC
Built-in power supply
Input circuit
Opto-isolated input (Sink output)
Output circuit
Opto-isolated open collector output (Sink type)
Options
Product CodeProduct
| ACX-PAC(W32) Ver.5.0 | ActiveX components sets for measurement system development |
| API-DIO(98/PC) | Windows version Digital I/O Driver |
| API-DIO(LNX) | Linux version Digital I/O Driver |
| CCB-96 | Connector conversion board |
| CM-32(PC)E | Signal monitor Accessory for Digital I/O (Checkmate) |
| CM-64(PC)E | Signal monitor Accessory for Digital I/O (Checkmate) |
| CN5-H96F | 96 pin half pitch connectors(A female) Five-piece Set |
| EPD-37 | Screw Terminal (M3.5 x 37) |
| EPD-37A | Screw Terminal (M3 x 37) |
| EPD-96 | Screw Terminal (M3.5 x 96) |
| EPD-96A | Screw Terminal (M3 x 96) |
| PCA96P-1.5 | A one end connector flat cable for 96 pin Half-Pitch connectors with(1.5m) |
| PCA96P-3 | A one end connector flat cable for 96 pin Half-Pitch connectors with(3m) |
| PCA96P-5 | A one end connector flat cable for 96 pin Half-Pitch connectors with(5m) |
| PCA96PS-0.5P | A one end connector shield cable for 96 pin Half-Pitch connectors with(Mold type, 0.5m) |
| PCA96PS-1.5P | A one end connector shield cable for 96 pin Half-Pitch connectors with(Mold type, 1.5m) |
| PCA96PS-3P | A one end connector shield cable for 96 pin Half-Pitch connectors with(Mold type, 3m) |
| PCA96PS-5P | A one end connector shield cable for 96 pin Half-Pitch connectors with(Mold type, 5m) |
| PCB96P-1.5 | A both ends connector shield cable for 96 pin half pitch connectors with(Mold type, 0.5m) |
| PCB96P-3 | A both ends connector shield cable for 96 pin half pitch connectors with(Mold type, 3m) |
| PCB96P-5 | A both ends connector shield cable for 96 pin half pitch connectors with(Mold type, 5m) |
| PCB96PS-0.5P | Both sides with connector shield cable for 68 pin 0.8mm pitch connectors(0.5m) |
| PCB96PS-0.5P | A both ends connector shield cable for 96 pin half pitch connectors with(Mold type, 0.5m) |
| PCB96PS-1.5P | Both sides with connector shield cable for 68 pin 0.8mm pitch connectors(1.5m) |
| PCB96PS-1.5P | A both ends connector shield cable for 96 pin half pitch connectors with(Mold type, 1.5m) |
| PCB96PS-3P | Both sides with connector shield cable for 68 pin 0.8mm pitch connectors(03m) |
| PCB96PS-3P | A both ends connector shield cable for 96 pin half pitch connectors with(Mold type, 3m) |
| PCB96PS-5P | A both ends connector shield cable for 96 pin half pitch connectors with(Mold type, 5m) |
| PCB96W-5 | Distribution Flat Cable for 96pin Half-Pitch Connector(96P -> 37P x 2 5m) |
| PCB96WS-5P | 96pin Half-Pitch to 2 x 37pin D-type(M), Shield Cable 5m |
| VI-DAQ | VI Library of data acquisition for LabVIEW |
粤公网安备 44030702001206号