EPD-96 接线端子板 日本原装contec

概要・特点

The products is a general purpose terminal fastened with screws, which relays the I/O wirings of ConTEC interface board/card or card with a 96-pin half-pitch connector. The pins in connector correspond to their respective terminals on the terminal strips on a one-to-one basis, allowing you to easily connect the board/card to an external device via the terminal strips. Note: To connect a board/card to the accessory, you need to purchase an option cable separately.
Up to 96 signal lines can be connected.
A signal line from an external device can be connected to the terminal simply by using screws.
The optional cable can be used to connect easily to the board/card.
Optimized configuration of board wiring.
Signal banks can be mounted on DIN rails.