上海锡明光电代理|美国SCHOTT|的冷光源，系列光源|

CV系列

A20500                                             Download Sales Sheet

ACE® Light Source

1.   Solid state dimmer for continuous control zero to full intensity.

2.    Heavy duty, grounded metal housing.

3.   115 or 230 input voltage versions available.

4.   IR interference filter for cool illumination.

5.   Full illumination on .60" active diameter input

6.  Interchangeable Modulamp® Units offer 2 positions to maximize individual lamp efficiencies.

7.   Choice of three, 150 watt halogen lamps - EJA, EKE, and DDL for intense, uniform illumination.

A20560                                            

1.    Heavy duty, grounded metal housing.

2.   115 or 230 input voltage versions available.

3.   IR interference filter for cool illumination.

4.   Full illumination on .60” active diameter input.

5.    Solid state dimmer control.

6.   Interchangeable Modulamp® Units offer 2 positions to maximize individual  lamp efficiencies.

7.    Choice of three, 150 watt halogen lamps - EJA, EKE, and DDL for intense, uniform illumination.

8.     Built-in thermal shut down.

A20800                                              Download Sales Sheet

DCR® III Light Source

1.  DC-regulated light source limits light fluctuation to ± 0.5% due to line voltage

variation.

2.  Universal input voltage – accepts 90 to 265 VAC.

3.  Current limiting – protects the unit from over heating due to defective and

aging bulbs.

4.  Transient protection – allows remote location of bulb.

5.  Lamp change indicator light – LED located on front panel changes from

green to red when lamp should be replaced. This is due to either an open or partially shorted filament.

6.   Soft start “lamp saver” circuitry.

7.   IR interference filter for cool illumination.

8.   Solid state dimmer control for continuous dimming.

9.    Interchangeable Modulamp® Units offer 2 lamp positions to maximize individual lamp efficiencies.

10.  Choice of three, 150 watt halogen lamps - EJA, EKE and DDL for intense, uniform illumination.

11.  Can power the RS232 from the 9-pin connector.

A20870                                            Download Sales Sheet

1.   DC-regulated light source limits light fluctuation to ± 0.5% due to line voltage

variation.

2.  Universal input voltage – accepts 90 to 265 VAC.

3.  Current limiting – protects the unit from over heating due to defective and  aging bulbs.

4.   Transient protection – allows remote location of bulb.

5.   Lamp change indicator light – LED located on front panel changes from  green to red when lamp should be replaced. This is due to either an open or partially shorted filament.

6.   Soft start “lamp saver” circuitry.

7.   IR interference filter for cool illumination.

8.   Solid state dimmer control for continuous dimming.

9.   Interchangeable Modulamp® Units offer 2 lamp positions to maximize  individual lamp efficiencies.

A20890                                               Download Sales Sheet

DCR® IV Light Source

  DC regulated light source with integrated Equalizer™ light feedback to provide

stabilized light output for the most demanding machine vision inspection  applications. (See DCR® III Plus datasheet for base description.)

1.  Stable lamp output over the life of the lamp and minimized lamp to lamp variation.

2.  Remote controllable using integrated RS232 interface.

1.   Flexible - Two configurations available:

A.   DCR® IV used with a reference Modulamp® unit and off-the-shelf fiber

optics, maintains DDL lamp output a

±2% over the life of the lamp and  ±8% lamp to lamp.

B.  For even greater control, use the DCR® IV with fiber optic products that  have an integrated reference bundle; special order only. This will maintain DDL lamp output and lamp to lamp variation within ±1%.

2.   All of the features of the DCR® III Plus Light Source including control of up to three additional DCR® III light sources via an expansion cable.

3.   LED’s located on the front panel indicate that the lamp intensity is stabilized.

4.   Easy to use front panel controls for calibration and intensity control.

5.  CSA certified to UL, CE compliant to low voltage and EMC directives.

6.  Universal input voltage – accepts 90 to 265 VAC, 50/60 Hz.

A20900                             

1.    Color temperature of 6000K.

2.    Twice the light output of DDL lamps.

3.    Bulb lifetime of 3500 hours average at 50W output.

4.     metal halide lamp specifically designed    with highest uniformity.

5.     Solid state dimmer control.

6.     Heavy duty, grounded metal housing.

7.     Universal input voltage - accepts 90 to 265 VAC.

8.    IR interference filter for cool illumination.

9.    Full illumination on .50” active diameter input.

17.  Detachable IEC cord.

18.  CSA approved to UL spec, CE compliant.

Mega 100  冷光源                        Download Sales Sheet

灯：                100W卤素灯

灯寿命：        1000小时（平均）

照明强度：     650，000Lux

灯电压安定： Within +/-0.1%(Input Voltage   Fluctuation +/-10%)

耗电量：         150W(350VA)

彩色过滤器： 一个容易可安装的彩色过滤器（可选择）

外部尺寸：     120H 76W2350Dmm

彩色温度：      3100K

重量：              1.5KG