Network Interface |
| |
| |
| Auto MDI/MDI-X, 10/100M Auto-Negotiation |
|
| IP, TCP, UDP, ICMP, DHCP, BootP, ARP/RARP, Telnet, SNMP, HTTP, SNTP, SMTP |
|
Serial Interface |
| |
| |
| |
| |
| |
| |
| |
| TxD, RxD, RTS, CTS, DTR, DSR, GND, DCD |
|
| |
| |
Features |
| Power: Startup(Red) Ready(Green) Ethernet : 10M Link(Orange), 100M Link(Green) Serial: Green |
|
| Windows Utility-JetPort Commander, HTTPS, SSH, Telnet, SNMP, DHCP Client, Device Password, Firmware Upgrade, Save to Flash |
|
| |
| Software reload default, Hardware reset button |
|
| |
| 16 IP addresses to prevent illegal users |
|
| Devices’ status, session history |
|
| RFC1213 MIB II, RFC1317 RS232_like and SNMP Trap |
|
| Automatic e-mail warning by pre-defined events |
|
| Trap to Syslog server or local display |
|
| Cold/Warm Start, Login Failed, IP and Password Changed, Access IP Blocked, Serial Port DCD/RI/DSR/CTS changed, Serial Port connected/disconnected |
|
Windows Utility |
| Device Discovery, Auto IP, Network Setting, Device and Serial Port Setting and monitoring, Notification setting, Firmware Upgrade, Configuration Backup and Restore, Group Configuration Wizards |
|
| |
| Port-Specific access right, Direct port addressing- via SSH to any Serial Over IP port, Direct Access via serial applications or IP application, VT320 support |
|
Group Configuration Wizard |
| Group IP Wizard, Group firmware upgrade, Group Backup/ Restore, VCOM and TCP Tunnel Setup Wizard |
|
Power Requirements |
| |
| 1 KV Burst (EFT), EN61000-4-4 0.5 KV Surge, EN61000-4-5 |
|
Mechanical |
| 43.72 x 21.40 x 4.40 cm (1U/19”) |
|
Environmental |
| |
| 5% to 95% (Non-condensing) |
|
| |
| |