产品介绍:VDC 输入,支持冗余模式
产品特点:
● | Support Modbus/TCP communication protocol at Ethernet port. |
● | Support DI/DO/AI/AO/Counter/Frequency modules |
● | Support HART protocol |
● | Support redundant communication and power modules |
● | Supports redundant I/O modules |
● | I/O configurable via the Ethernet (Using the iDCS-8830 Utility) |
● | Supports Hot-swap and auto configuration |
● | Supports power on value and safe value for analog/digital output module |
● | Allows maximum of 4 clients access simultaneously |
● | Maximum 255 digital I/O in one iDCS-8830 |
● | Maximum 64 analog output in one iDCS-8830 |
● | Maximum 128 analog input in one iDCS-8830 |
● | Maximum 128 analog input in one iDCS-8830 |
产品规格:
CPU module | ||
CPU | 80186 or compatible (16-bit and 80MHz) | |
SRAM | 512KBytes | |
Flash | 512 KB; Erase unit is one sector (64K bytes); 100,000 erase/write cycles. | |
EEPROM | 16 KB | |
Data retention: 40 years; 1,000,000 erase/write cycles. | ||
64-bit Hardware Serial Number | Yes | |
Built-in Watchdog Timer | Yes (0.8 second) | |
Short Circuit Protection | Yes | |
Power-on Value | Yes, Programmable | |
Safe Value | Yes, Programmable | |
Communicate Interface | ||
COM 1 | RS-232 (to update firmware) | |
CAN Port | Internal communication with the CAN I/O modules | |
Ethernet Port | 10/100base-TX Ethernet Controller | |
(Auto-negotiating, Auto_MDIX, LE indicator) | ||
I/O Expansion Slots | ||
Slot Number | 8 | |
Hot Swap | Yes | |
Auto Configuration | Yes | |
Power | ||
Protection | Power reverse polarity protection | |
Isolation | 1 kV | |
Power requirement | +10 ~ +30 VDC | |
Power supply | 40 W | |
Mechanical | ||
Dimensions (W x L x H) | 374 x 132 x 100 mm | |
Installation | DIN-Rail or Wall Mounting | |
Environment | ||
Operating Temperature | -25 ~ +75 °C | |
Storage Temperature | -30 ~ +80 °C | |
Humidity | 10~ 90%, Non-condensing | |
EEPROM | 16 KB | |
Data retention: 40 years; 1,000,000 erase/write cycles. | ||
64-bit Hardware Serial Number | Yes | |
Built-in Watchdog Timer | Yes (0.8 second) | |
Short Circuit Protection | Yes | |
Power-on Value | Yes, Programmable | |
Safe Value | Yes, Programmable | |
Communicate Interface | ||
COM 1 | RS-232 (to update firmware) | |
CAN Port | Internal communication with the CAN I/O modules | |
Ethernet Port | 10/100base-TX Ethernet Controller | |
(Auto-negotiating, Auto_MDIX, LE indicator) | ||
I/O Expansion Slots | ||
Slot Number | 8 | |
Hot Swap | Yes | |
Auto Configuration | Yes | |
Power | ||
Protection | Power reverse polarity protection | |
Isolation | 1 kV | |
Power requirement | +10 ~ +30 VDC | |
Power supply | 40 W | |
Mechanical | ||
Dimensions (W x L x H) | 374 x 132 x 100 mm | |
Installation | DIN-Rail or Wall Mounting | |
Environment | ||
Operating Temperature | -25 ~ +75 °C | |
Storage Temperature | -30 ~ +80 °C | |
Humidity | 10~ 90%, Non-condensing |