A 1230-02
4-quadrant voltage amplifier
DC-7 MHz | 380 V/μs | (2x)185 W (source) | (2x) 68 W (sink)
- Broadband lab amplifier for ohmic and complex loads
- Ideally suitable as downstream equipment for function generators
- Output voltage up to 75 Vpeak
- Output current up to 5 Apeak
- Addition of two inputs with 50 Ω and 100 kΩ input resistance, respectively, is possible
- A preamplifier output (Bridge out) allows for simple bridge circuit structures
- Full remote control possible through USB port
- 2 supply voltages
Electrical data
|
|
Output Voltage vs. Frequency
|
U-I Plot, Supply
DC Limit |
Output voltage |
± 75 Vpeak |
Output current |
± 5 Apeak |
Performance range |
DC – 1 MHz |
Frequency response |
DC - 7 MHz (Small signal -3 dB) |
Slew rate |
380 V/μs |
Voltage amplification |
20 ± 1 % (± 100 ppm /°C) input 50 Ohm
10 ± 1 % (± 100 ppm /°C) input 100 kOhm |
Offset |
± 2 mV typ.(± 0.1 mV /°C) |
|