关闭广告
关闭广告
当前位置: 首页 » 智能资讯 » English » Products&Solutions » 正文

Released New Wireless RTU S280

放大字体  缩小字体 发布日期:2017-07-25  来源:http://www.gsm-rtu.com  作者:Sam  浏览次数:1136
核心提示:The Wireless GSM 3G RTU S280 can be used for monitoring maximum 400 distributed I/O endpoints though maximum 50 wireless Data Acquisition Modules by RF 433Mhz wireless network. Also it can be used as for converting the meters, transducers, Data Acquisitio

The Wireless GSM 3G RTU(Remote Terminal Unit) S280 is a cost effective remote terminal unit. It inbuilt quad band GSM/GPRS module (Or WCDMA/CDMA2000) , ISM Band 433Mhz Radio Frequency module, and ARM® Cortex™ 32 Bit RISC Core. It is a multi Isolation I/O port remote terminal unit and wireless data acquisition system.

The Wireless GSM 3G RTU S280 can be used for monitoring maximum 400 distributed I/O endpoints though maximum 50 wireless Data Acquisition Modules by RF 433Mhz wireless network. Also it can be used as for converting the meters, transducers, Data Acquisition modules, PLC data via RS485 serial port to 433 MHz wireless network and then transmits it to GSM/SMS/GPRS/3G/Ethernet network. It performs as a wired – wireless – SMS/GPRS/ 3G/Ethernet/RS232/RS485 gateway. The range covers about 2~5Km, plus WT-02 Wireless repeaters can increase the wireless distance.


The Wireless GSM 3G RTU S280 equips 4 digital inputs, 2 solid relay outputs, power status detection moulde, and onsite temperature and humidity inputs. All of the inputs and outputs are isolation.

The Wireless GSM 3G RTU S280 can be used as Wireless SMS Alarm, when the equipped I/O or 400 distributed I/O alarm occurrence, it also can send pre-definition SMS to up to 10 mobile phone users.

The Wireless GSM 3G RTU S280 is suitable for lots of applications, e.g.: Wireless data logging, BTS monitoring, remote data acquisition, telemetrically, farm, energy saving, agriculture, automatically meter reading system, weather station, storage, factory and other applications.

The Wireless GSM 3G RTU S280 supports Modbus RTU Slave, Modbus TCP, TCP/UDP, SMS and data transparent transmission protocol through RS232/RS485/GSM/SMS/GPRS/3G./Ethernet.



The Wireless GSM 3G RTU can be used as:

  • A Wireless Data Acquisition System. Supports monitoring up to 50 wireless data acquisition module for maximum 400 endpoints by 433Mhz wireless network, the range covers about 2~5Km, plus WT-02 Wireless repeaters can increase the wireless distance. Each endpoint can be setup threshold value or alarm conditions, once the value exceed threshold value or activated will send out SMS to alert the users immediately.
  • A Wireless Gateway. Though the WT-01 wireless data transfer unit, it can convert the meters, transducers, Data Acquisition modules, PLC data via RS485 serial port to 433 MHz wireless network and then transmits it to GSM/SMS/GPRS/3G/Ethernet network. It performs as a wired – wireless – SMS/GPRS/3G/Ethernet/ RS232/RS485 gateway.
  • A SMS Alarm Controller. The IO activations or deactivations can be reported by SMS and optionally confirmed by phone calls. Each input can have its own message texts and the message can be programmed by users.
  • A Switch with SMS Remote Control. SMS texts for switching particular terminals on/off or pulse output are configurable.
  • A Timer-Switch which can be activated automatically. It can be setup when to performs preset logic events, e.g.: timer reports its status, timer switch on/off device or equipments automatically.
  • A SMS reporter. The WIRELESS GSM 3G RTU can setup daily automatically report one or more times of its current status to users automatically.
  • A Data Logger. The unit can save all of the events or acquisition data in internal memory storage, the historical data can export to CS format via USB port or upload to server by GPRS /3G network according to schedule, no distance limitation.


Typically Applications

Suitable Applications:

1. Security Alarm System applications;                2. Supervision and monitoring alarm systems

3. Automatic monitoring system;                          4. Vending Machines;

5. Pumping Stations;                                           6. Buildings and Real Estate;

7. Weather Stations remote control and data logging;       8. River Monitoring and Flood Control remote control;

9. Oil and gas pipelines remote control and data logging; 10. Corrosion protection

11. Valve controls;                                                             12. Wellheads;

13. Energy saving,street lights control system;                  14. Tanks, levels, temperatures,water leakage applications;

15. Transformer stations;                                                    16. Unmanned machine rooms;

17. Control room application;                                               18. PLC and Automation System, M2M;

19. GSM Access Control System, GSM Gate Opener, etc.

S280 Wireless GSM 3G RTU & Wireless DAM Table

Model

Detail

3G

Precision

DIN

T/H

DO

Record

Communication

S280

More

V

12bit

4

1

2

3500

USB/RS232/RS485

433Hz/GSM/GPRS/3G/RJ45

WT-01

More

Wireless DTU(Data Transfer Unit) with RS485 Port

WT-02

More

Wireless Repeater, range 2~5Km

WT-03

More

Wireless DAM, supports 1 Temperature&Humidity Sensor.

WT-05

More

Wireless DAM, supports 1 Temperature&Humidity Sensor and 2 Analog input(0~5V)

WT-06

More

Wireless DAM, supports 4 Analog input(0~5V) and 4 Digital Inputs

Notice

1. *C stands for inbuilt module is CDMA2000. *W stands for inbuilt module is WCDMA.

2. RS232/RS485 serial port default is RS485, optional is RS232.

 
关键词: Wireless RTU, Wireless Data Acquisition, GPRS RTU, 4G RTU, 3G RTU
 
[ 智能资讯搜索 ]  [ 加入收藏 ]  [ 告诉好友 ]  [ 打印本文 ]  [ 关闭窗口 ]

 
0条 [查看全部]  相关评论

 
 
网站首页 | 订阅电子周刊 | 联系方式 | 关于我们 | 问题解析 | 版权隐私 | 使用协议 | 网站地图 | 网站留言 | 广告服务 | 积分换礼 | RSS订阅|
安全联盟站长平台 不良信息举报中心网络110报警服务
深公网安备案证字第 4403101901094 号 粤ICP备12078626号-1
增值电信业务经营许可证号 粤B2-20120463